Travel up to 35 miles one-way from our service center in Kalispell, Montana

Up to 100' of RG6 Single Coaxial Cable for each receiver / tuner in the home to the dish or dish switch.

1 Wall mount on an exterior wall (wood or acceptable siding) between 5' and 8' above the ground.

Up to 30' of ground wire from the dish to the switch (if applicable) and to an acceptable building ground.

Penetration of 1 exterior wall for each receiver / tuner in the home.

Wire ties and sealants necessary to protect and seal cable runs and point(s) of entry.

Connecting of each receiver / tuner to one television within 3' of the receiver / tuner.

Connecting of each receiver / tuner to an existing telephone jack within 10' of each tuner / receiver.

Programming of each remote control to each receiver / tuner & television if possible.

Up to 30 minutes of programming assistance, education of remote controls, menus, guides, etc.

Approx. 2 1/2 hours of labor + 30 minutes of labor for each additional room. Additional time billed separately.

Site Surveys ($ 65.00 in our local service areas)

Travel over 35 miles one-way from our service center in Kalispell, Montana.

Cable lengths over 100' from the dish & switch to each receiver / tuner.  (Requires cable upgrade at approx. 65 cents per foot)

Roof mounts, 2nd story mounts, pole mounts, etc.

Crawl space and/or attic cable runs

Ground wire over 30' in length that may be required for proper grounding.

Additional exterior or interior wall penetrations.  Wall plates / Wall boxes, etc.

Wire molding, conduit, etc. that may be required to cover or protect cable runs.

Additional connections to VCR's, Home Theater Systems, additional Televisions, rooms, etc.

Telephone Jack installations or line cord and runs over 10' from receiver / tuner to the phone jack (when required)

Additional time that may be required on the phone with the satellite service provider for programming, etc.

Programming of remote controls to other devices such as VCR's, DVD's, etc.

Return Trips that may be necessary due to pole mount installations, line-of-site issues, etc.

Additional time required for installations that exceed average standard installation times.